

(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
(edit with the Customer Reassurance module)
This document describes ValueRAM's KVR26N19S8/8 is a 1G x 64-bit (8GB) DDR4-2666 CL19 SDRAM (Synchronous DRAM), 1Rx8, memory module, based on eight 1G x 8-bit FBGA components. The SPD is programmed to JEDEC standard latency DDR4-2666 timing of 19-19-19 at 1.2V. Each 288-pin DIMM uses gold contact fingers. The electrical and mechanical specifications are as follows:- Power Supply: VDD=1.2V Typical- VDDQ = 1.2V Typical- VPP - 2.5V Typical- VDDSPD=2.2V to 3.6V- Nominal and dynamic on-die termination (ODT) for- data, strobe, and mask signals- Low-power auto self refresh (LPASR)- Data bus inversion (DBI) for data bus- On-die VREFDQ generation and calibration- Single-rank- On-board I2 serial presence-detect (SPD) EEPROM- 16 internal banks 4 groups of 4 banks each- Fixed burst chop (BC) of 4 and burst length (BL) of 8- via the mode register set (MRS)- Selectable BC4 or BL8 on-the-fly (OTF)- Fly-by topology- Terminated control command and address bus- PCB: Height 1.23” (31.25mm)- RoHS Compliant and Halogen-Free